STIEBEL ELTRON DHC 8 EL, Operation And Installation Instructions Manual

Description of the unit (External)

Operation Instruction 

for the user and the qualified installer

1.  Operation and installation 

  instruction

1.1 Description of the unit.

The  DHC 8

 EL

  fully electronic  instanta -

neous water heater heat the water while it 

is  flowing  through  the  unit. The  indicator 

light will show when the heater is in opera-

tion, and the temperature can be adjusted 

by turning the knob at the front of the unit,      

which controls the operation of the heater 

electronically.

1.2  Using the unit 

1. Adjust the temperature using at   

  the selector. 
  Level

  heats the water to a 

      temperature of~ 40 C
  Level 

  heats the water to a

      medium temperature
      of ~ 50 C 
  Level 

  heats the water to a 

      maximum temperature
      of ~ 60 C
 

Note : 

Incase incoming water flow is 

 too high or cold water 

 temperatures are too low 

     temperatures may not be reached. 

2. Turn the hot water on.  The indicator 

  light will show at the front of the unit (a).

Fig 1

STIEBEL ELTRON

4

1.3 Description of the unit  (External)

a. Indicator Light 

d. Cold Water Inlet Pipe

b. Temperature Control knob 

c.  Hot Water Outlet Pipe