EN
GL
ISH
www.stiebel-eltron.com
LWZ 70 E |
15
INSTALLATION
Settings
2 x
D
00000
44
93
2
f
f
Press R twice to return to standard mode.
If no key is pressed for 5 minutes, the appliance returns automat-
ically to standard mode.
12.3 Service menu
In the service menu, you can view the last 10 fault messages.
In the case of blocking faults, the settings menu and the read-out
menu are blocked and only the service menu can be accessed.
Pressing menu opens the service menu.
Viewing the service menu
26
�0
4�
15
�0
06
4
f
f
Press menu in standard mode. The settings menu is
displayed.
26
�0
4�
15
�0
05
7
f
f
Press plus or minus to switch to the read-out menu.
26
�0
4�
15
�0
05
8
1
2
1 Fault message number
2 Fault code
f
f
Press the menu button to enable the service menu.
You can use plus and minus to scroll through the read-out menu.
Indication "No fault message"
26
�0
4�
15
�0
05
6
Current fault message (fault symbol on the display)
For fault messages with a cause that has not yet been eliminated,
the fault symbol (spanner) appears.
26
�0
4�
15
�0
07
5
Resolved fault message (no fault symbol on the display)
For fault messages with a caused that has been eliminated, the
fault symbol (spanner) does not appear.
26
�0
4�
15
�0
07
6
Back to standard mode
2 x
D
00000
44
93
2
f
f
Press R twice to return to standard mode.
Deleting fault messages
You can delete all fault messages by holding down R for five sec-
onds. This is only possible if there are no active faults.
