Stiga BL 40 Li, Operator'S Manual

EN - 5

 2.4  MAINTENANCE, 

STORAGE

Ensure regular maintenance 

and correct storage to 

maintain machine safety and 

high performance levels.
Maintenance

• 

Never use the machine with 

worn or damaged parts. 

Faulty or worn-out parts 

must always be replaced 

and never repaired.

•  Cleaning and user 

maintenance shall not be made 

by children without supervision.

  The noise and vibration 

levels shown in these 

instructions are the maximum 

levels for use of the machine. 

Suitable preventive measures 

must be adopted to eliminate 

possible harm caused by high 

noise levels and vibration-

induced stresses; utilise the 

machine at constant speed, 

firmly hold the handgrip with 

adequate strength, utilise the 

machine at the minimum speed 

required to perform the work, 

wear ear-protection devices, 

make frequent and adequate 

pauses during the work. 
Storage

• 

To reduce fire risks, do 

not leave containers with 

debris inside a room. 

 2.5 

BATTERY / BATTERY 

CHARGER

 IMPORTANT 

The following 

safety instructions are in addition 

to the safety requirements 

provided in the specific battery 

and battery charger manual 

delivered with this machine. 

• 

Only use battery chargers 

recommended by the 

manufacturer to recharge 

batteries. An inadequate 

battery charger may cause 

electric shock, overheating 

or corrosive liquid to 

leak from the battery.

• 

Use only batteries specifically 

designed for your power tool. 

The use of other batteries may 

cause injuries and fire risks. 

• 

Make sure that the machine 

is switched off before inserting 

the battery. Inserting a 

battery in a machine which is 

switched on can cause a fire.

•  Keep all unused batteries at 

a distance from paper clips, 

coins, keys, nails, screws 

or other small metal objects 

as contact with the same 

can cause short circuits. 

Short circuits between 

battery contacts can lead 

to explosion or fires.

• 

Do not use the battery 

charger in places where 

there are inflammable 

vapours, substances or 

on easily inflammable 

surfaces like paper, fabric, 

etc. During recharge, the 

battery charger becomes 

heated and may cause fire.

•  When transporting batteries, 

make sure the contacts never 

come into contact with each 

other and never use metal 

containers to transport them.

 2.6  ENVIRONMENTAL 

PROTECTION

Protecting the environment must 

be a significant and top priority