4
GB
ENGLISH
STIGA Kick Combo - Art.nr. 75-1119-XX
CAutIoN!
• Read the manual carefully before using your new product.
• This product should always be assembled by an adult.
• Before each ride, make sure that all screws are tightened and that the levers / connections are
in their proper positions.
• Protective equipment should be worn. We recommend you to wear a helmet, wrist, knee and
elbow protectors and shoes with flat rubber sole.
• Be careful when riding this product in order to avoid falls or collisions which can injure the
user or other people. To use the kick scooter requires great skill.
• This product is only intended for use on level ground. Do not ride in downhill slopes.
• Do not use the product for tricks or jumps.
• Must not be used in traffic.
• Do not let children use the product without adult supervision.
• All use of the product is at one’s own risk.
• The instructions should be saved in case it becomes necessary to lodge a complaint with
regard to the product.
ASSEMBLY
see pictures on page 2-3
• Release the quick release collar (fig A1).
• Pull the release lever (fig A2) and fold out the front fork into an upright position.
• Lower the release lever (fig B1) and tighten the screw (figure B2) and the quick release collar
(fig C1) properly.
•
Assembling of skis / Montage des skis:
Disassemble the brake before using the product with
skis on snow. Loosen the screws. (fig E+F) Attach the skis in the intended position. (fig G1)
Tighten the screws with the hex key so that they are firmly in position. Use the shorter screw
for the front ski and the longer screw for the rear ski. (fig G1)
•
Assembling of wheels / Montage des roues:
Be sure that the brake is assembled when using
the product on wheels. Mount the wheels and tighten the screws carefully. (fig D) After
assembling the brake, test it so it is working properly.
• Attach the handlebar to the steering column and make sure the spring button (fig H1) is in the
locked position.
• Adjust the handlebars to a suitable height for you (make sure that the spring button (fig I1) is
in the locked position) and then tighten the quick release collar (fig I2) properly.
WARNiNG! coNTAiNs smALL pARTs.
choKiNG hAzARD. pRoTEcTiVE EQuipmENT
shouLD bE WoRN. NoT To bE usED iN TRAFFic.
max user weight
50 KG
5+
