page
16
Release 00 - 03/2018
Engine RS100 - RSC100
Service manual
5.1. Emptying and removing the tank
1 - Remove the ring (
1
) of the petrol pipe (
2
) from
the tank side and drain all the fuel from the tank
and the pipe into a suitable container.
2 - Remove the starter assembly (
3
) by loosening
the three nuts (
4
).
3 - Loosen the rear screw (
5
) and remove the tank
(
6
).
4 - When fitting, perform the ab
ove operations in
reverse.
WARNING: Before refilling the tank with new
fuel, check that the petrol pipe is intact.
5.2. Cleaning the tank
1 - Remove the tank
.
2 - Remove the clamp (
1
) from the side of the tank
and disconnect the petrol pipe (
2
).
3 - Slide out the filter tube (7
) and blow compressed
air through it so as to remove any deposits inside.
4 - Keeping the hole (
8
) in the spigot closed, pour
about 100 cc of clean petrol into the tank and
shake it vigorously to clean the inside.
5. TANK AND SUPPLY
6
5
7
8
1
2
3
4
4
<< BACK >>
INDEX