page
24
Release 00 - 03/2018
Engine RS100 - RSC100
Service manual
8. CARBURATION
( valid for RSC100 model)
13
14
15
12
9
5 - Using pliers, disconnect the intake butterfly rod
(
7
) and slide the small rod (
8
) for the relative com-
pensation spring upwards.
6 - Disconnect the wire (
9) from the choke butterfly
lever, completely remove the carburettor (
10
) for
the relative compensation spring upwards (
11
).
NOTE: Empty any remaining petrol from the
tank by removing the drain screw (12) as
shown in the figure. When finished, replace
the screw.
7 - Unscrew the central screw (
13
) securing the tank
(
14
) and remove the corresponding OR (
15
).
7
8
11
10
<< BACK >>
INDEX