page
36
Release 00 - 03/2018
Engine RS100 - RSC100
Service manual
10. GOVERNOR SYSTEM OF THE CARBURETTOR
10.3a. Replacing the lever support (
model
RS100)
1 -
Remove the filter element
and the
filter holder
2 - Disconnect the spring (
7
).
3 - Remove the two screws (
13
) and replace the
lever support.
4 - Perform the above operations in reverse order
when assembling.
7 -
Replace the filter holder
and the filter
8 - Adjust the maximum speed
Tightening torques
13
Support screw, governor
assembly
8-12 Nm
Technical information
Maximum speed
2800 (±100) g/1’
Special equipment
5
Speed indicator
7
13
13
<< BACK >>
INDEX