page
42
Release 00 - 03/2018
Engine RS100 - RSC100
Service manual
9
6
12.4. Replacing the system for turning off and stop-
ping the engine
1 - Remove the starter assembly
.
2 - Remove the filter assembly
mod.
RSC100
mod. RS100
).
3 - Disconnect the brake wire (
2
) from the lever
(
3
).
4 - Disconnect the earth cable Faston connector
(
9
).
5 - Loosen the two screws (
10
) and the spring (
11
).
Remove the support bracket (
5
).
6 - When fitting, perform the above operations in
reverse, tightening the screws (
10
) to the torque
indicated.
7 -
Refit the starter assembly
and the filter
assembly
mod. RSC100
mod. RS100
).
8 - Start the engine, release the lawnmower lever
and check that the engine stops within 3 secon-
ds.
Tightening torques
10
Brake support screws
8-12 Nm
Special equipment
7
Universal tester
12. TURNING OFF AND STOPPING THE ENGINE
10
10
5
11
<< BACK >>
INDEX