background image

14

TROUBLESHOOTING / ACCESSORIES

EN

The table contains a list of all possible combina

-

tions  between  bar  and  chain,  indicating  those 

which may be used on each machine, marked with 

the symbol  “ ”.

WARNING!

 In consideration that the 

selection,  application  and  usage  of  bar  and 

chain are actions made solely by the user, the 

latter assumes responsibility for damages of 

any kind due to such actions. When in doubt 

or  if  lacking  knowledge  of  the  specificity  of 

each bar or chain, contact your retailer or spe

-

cialised gardening centre.

 10. ACCESSORIES

Bar and chain combinations

Pitch

BAR

CHAIN

Inches

Length

I

nches / cm

Groove

width

Inches / mm

Code

Code

3/8”

16” / 40 cm

0,050” / 1,3 mm

OREGON

160SDEA041

OREGON

91P057X

IMPORTANT

  Carefully reading the infor-

mation in this Manual provides good machine no-

tions and the guide allows you to identify and face 

the most common operating situations. For any 

other difficulty or problem, please contact an Au

-

thorised Service Centre.

•  The machine does not start:

–   make sure there is current in the socket;

–   check that the power cable and extension lead 

are intact;

–   check that the switch works correctly; if this is 

not the case, contact your Dealer for a replace

-

ment;

•  Poor performance

–   check  the  direction  in  which  the  chain  is 

mount ed,

–   check that the chain is correctly sharpened and/

or for any worn or damaged parts (contact your 

Dealer  concerning the most suitable interven

-

tion).

•  The chain does not turn:

–   make sure that the front guard is positioned fac

-

ing backwards.

•  The oil does not flow:

–   make sure there is oil in the tank and flush it if 

necessary (

8.7).

•   Sparks form:

–   contact your Dealer for an inspection of the mo

-

tor and brushes.

 9. TROUBLESHOOTING

All manuals and user guides at all-guides.com

Summary of Contents for SEV 2416 Q























Reviews: