EN
IDENTIFICATION OF MAIN COMPONENTS / SYMBOLS
3
Maximum noise and vibration levels [1]
Operator ear noise pressure level
dB(A)
84,92
– Measurement uncertainty
dB(A)
3
Measured sound power level
dB(A)
104
– Measurement uncertainty
dB(A)
3,01
Garanteed sound power level
dB(A)
107
Vibration level
m/sec
2
3,838
– Measurement uncertaint
m/sec
2
1.5
TECHNICAL SPECIFICATIONS
Voltage
V~
220-240
Power frequency
Hz
50
Motor power
W
2400
Bar length
mm / “ 405 mm 16”
Chain speed
m/sec
13.5
Weight
kg
5.3
Oil
ml
230
[1]
Notice:
The vibration value indicated was determined with a standardized tool and can be used to make comparisons with other electric equipment
as well as temporary estimates of the load through the vibrations.
WARNING!
The vibration value may vary according to the usage of the machine and its fitted equipment, and be higher than the one indicated. Safety
measures must be established to protect the user and must be based on the load estimate generated by the vibrations in real usage conditions.
In this regard, all the operational cycle phases must be taken into consideration, such as switching off or idle running.
11)
Direction in which the chain
is mounted
13)
Rotation direction to loosen
(a) or tighten (b) the bar
12)
Direction in which the chain
runs
1)
Read the instruction manual before using the
machine.
2) 3)
If you are using the machine every day in
normal conditions, you can be exposed to a noise
level of 85 dB (A) or higher. Wear safety glasses
and hearing protection.
4)
Do not leave the machine in the rain (or in
damp con ditions).
5)
Unplug the chain-saw immediately if the ca ble
(or extension lead) is cut or damaged.
2. SYMBOLS
EXPLANATORY SYMBOLS
ON THE MACHINE
(if present)
1
2
3
4
5
All manuals and user guides at all-guides.com
