72
EN
SWP 475 / 577
10. Decommissioning
10.1 Disassemble sliding bracket
CAUTION
Risk of injury through tipping over of the
sliding bracket!
Tipping over of the sliding bracket may lead to
slight injuries, such as jamming of the fi nger or
haematomas in users or other persons.
•
When carrying the device, hold it so that the
sliding bracket cannot tip over.
1
2
3
Fig. 13: Sliding bracket disassembly (SWP 475)
1. Bring the sliding bracket (2) into the vertical
position.
2. Press the lock springs (3) inwards on both
sides, so that the sliding bracket (2) is
released for removal.
3. Pull the sliding bracket (2) out of both handle
fi ttings (1) simultaneously.
Risk of injury through tipping over of the
sliding bracket!
Tipping over of the sliding bracket may lead to
slight injuries, such as jamming of the fi nger or
haematomas in users or other persons.
•
When carrying the device, hold it so that the
sliding bracket cannot tip over.
1
2
Fig. 14: Sliding bracket disassembly (SWP 577)
1. Bring the respective arrows on the housing to
the bar of the handle fi ttings (1).
2. Position yourself between the sliding bracket
in front of the device.
3.
Grip both handle fi ttings (1) with your hands
and carefully push them out.
4.
At the same time pull out the handle fi ttings
from both receptacles of the device.
10.2 Disposal
• Dispose of the device in an environmentally
friendly manner in accordance with the
applicable regional regulations.
Decommissioning
