3
READ AND FOLLOW ALL ASSEMBLY, OPERATING, AND
SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO (2)
ADULTS ARE NEEDED TO PUT THIS TABLE TOGETHER!
1.
Attach wood bottom board (#2) to caster rails
(#1) as shown in Figure 1. Turn caster rail as
shown with pivot tubes toward inside, and attach
board (#2) with four carriage bolts (#3) and four
wing nuts (#4). Tighten wing nuts securely.
Figure 2
PIVOT TUBES MUST FACE
INWARD AND POINT
STRAIGHT UP AS
SHOWN!
AT LEAST TWO (2) ADULTS ARE NEEDED TO
COMPLETE THE REST OF THIS ASSEMBLY! WHEN
ASSEMBLING TOPS TO BASE, HANDLE TOP
ASSEMBLIES BY GRASPING ONLY THE TOPS
THEMSELVES. DO NOT GRASP METAL LEGS, U-
SUPPORT, LINKAGE, OR HINGES. THESE PARTS
CAN MOVE AND COULD PINCH FINGERS OR
HANDS CAUSING SERIOUS INJURY! ASSEMBLE
AS SHOWN WITH LEGS FULLY CLOSED AND
TOPS IN A VERTICAL POSITION. DO NOT OPEN
LEGS AND TRY TO ASSEMBLE. TABLE TOPS ARE
HEAVY - DO NOT ATTEMPT TO ASSEMBLE
ALONE!
Figure 1
DO NOT OPEN THE TABLE TO PLAYING POSITION
UNTIL BOTH TOPS ARE INSTALLED! DO NOT LEAVE
TABLE STANDING UNATTENDED. IT COULD BE
KNOCKED OVER CAUSING SERIOUS BODILY INJURY
OR PROPERTY DAMAGE.
2.
Attach table top (#5) to table base that you just
assembled, as shown in Figure 2. With at least one
adult on each side of table top (#5), lift top and
align ends of "U"-support tube with top of pivot tubes
on caster rails (#1). Slide tubes together.
3.
With two adults, put other table top onto other pivot
tubes following instructions in step 2.
4.
Attach corner protectors (#31) to rails using tree
plugs (#22). Simply push the plugs through the
protector and into the rail until snug.
