2.
Attach Cross Tube (
#7
) to Caster Beam Assemblies
(#8)
using four Thumb Screws (
#26
) as shown
in
FIGURE 2.
READ AND FOLLOW ALL ASSEMBLY, OPERATING,
AND SAFETY INSTRUCTIONS CAREFULLY . AT LEAST
TWO (2) ADULTS ARE NEEDED TO PUT THIS TABLE
TOGETHER!
1.
Slide a Caster Wheel
with
Lock (
#13
) into Caster Beam
as shown in
FIGURE 1
. On the other end of the Caster
Beam attach a Caster Wheel
without
Lock (
#9
). Make
sure you have one Caster Wheel with lock and a Caster
Wheel without lock for each Caster Beam.
Repeat this step to attach the Casters to the second
Caster Beam.
4
9
Parts Needed:
2 pcs -
#8
Caster Beam
2 pcs -
#9
Caster without lock
2 pcs -
#13
Caster with lock
8
8
13
13
