12
DETAIL B
12
ROLLER
ROLLER TRACK
THE FOLLOWING STEPS REQUIRE
TWO
CAPABLE ADULTS.
ROLLER TRACK
OPENING
ROLLER
12
11”
2
PRE-ATTACHED
ROLLERS
UNDER THE TABLE TOP
2
DETAIL A
Offset the table tops 11”
from the center of the table
and align the edges with
the bottom board, then lay
the table top on the table.
Make sure the
rollers
drop
into the opening in the
track
as shown in
Detail A.
9. With at least
two
capable adults lift the table top
#2
and
position it about
11
inches
from the center of the table,
then lower the top making sure
Rollers #12
drop into the
opening in the
Tracks
.
See
Detail A
.
10. Once all rollers are in the tracks, slide the table top toward
the middle of the table until it stops as shown in
Detail B
.
Repeat steps 9-10 for the second table top.
Notched
ends of the table
tops must face each other
in the middle of the table.
