58
BR 500, BR 550, BR 600
12.
Special Servicing Tools
No.
Part Name
Part No
Application
Rem.
1
Compression tester
5910 850 2000
Testing valves and piston rings for
leaks
2
Locking screw
4282 890 2700
Blocking the crankshaft
3
Installing tool
5910 890 2212
Fitting snap ring in piston
– with sleeve –
5910 893 1704
4
Carburetor and crankcase tester
1106 850 2905
Testing crankcase and carburetor for
leaks
5
Hose
1110 141 8600
Testing carburetor for leaks
6
Nipple
0000 855 9200
Testing carburetor for leaks
7
Vacuum pump
0000 850 3501
Testing crankcase for leaks
8
Feeler gauge
4180 893 6400
Adjusting valve clearances
9
Socket, DIN 3124, 13 mm
5910 893 5608
Flywheel nut
10
Puller
1116 893 0800
Removing flywheel
11
Torque wrench
5910 890 0311
6 to 80 Nm; torque wrench
5910 890 0312 with optical/acoustic
signal may be used as an alternative
12
Torque wrench
5910 890 0301
0.5 to 18 Nm; torque wrench
5910 890 0302 with optical/acoustic
signal may be used as an alternative
13
Socket, 17 mm
5910 893 5610
Releasing fanwheel
14
Puller
5910 890 4400
Universal puller
15
– Jaws (profile # 3.1)
Removing oil seals
16
Installing sleeve
1118 893 4602
Installing oil seal
17
Press sleeve
1108 893 2405
Installing oil seal
18
Combination wrench
4180 890 3400
Spark plug
19
Assembly drift
1108 893 4700
Removing and installing piston pin
20
Setting gauge
4118 890 6401
Adjusting air gap between ignition
module and flywheel
21
Test flange
1119 850 4201
Leakage test
22
Bushing
0000 963 1008
For use with test flanges
1106 850 4201 and 1119 850 4201
23
Sealing plate
0000 855 8106
Sealing exhaust port
24
Ignition tester, ZAT 3
5910 890 4520
Testing the ignition system
25
Ignition tester, ZAT 4
5910 850 4503
Testing the ignition system
26
Puller
5910 890 4501
Removing limiter caps
27
Screwdriver, T 27 x 200
5910 890 2415
RA_452_00_01_02.book Seite 58 Donnerstag, 16. Februar 2012 11:52 11