FB 131
English
13
Redefining bed edges
The arrow (1) on the deflector indicates
the direction of operation.
The deflector is set at the factory with its
open side facing away from the
operator. This ensures that cuttings and
other debris are directed away from the
power tool and operator.
N
Starting the Engine
N
Start the cut at no less than half
throttle and continue cutting at full
throttle.
N
Hold and guide your power tool so
that the blade is vertical.
N
Cut steadily so that the engine is not
lugged down – do not apply force.
N
Operate at no more than a normal
walking pace.
N
Do not push the blade into the
ground.
N
Always pull the power tool, do not
push it forward.
WARNING
Always hold and operate your power tool
on the left-hand side of your body with
the cutting attachment to the rear.
Maintain a safe distance from the cutting
attachment at all times.
N
Cut at a steady pace to avoid having
to make several passes.
N
Use the gunning sight (1) to line the
blade up with the edge of the bed.
The following STIHL attachments may
be mounted to the basic power tool:
9924BA031 KN
1
9924BA023 KN
9924BA027 KN
1
Approved Power Tool
Attachments
Interchangeable
Attachment
Application
BF
Cultivator with pick
tines
HL 145°
Long reach hedge
trimmer
HT
Pole pruner
KB (4601)
Bristle brush
KW (4601)
PowerSweep
