FBD-KM
English
14
Checking the wear guard
N
Check the wear guard (1) for
damage before starting the power
tool.
N
The wear guard must be replaced
as soon as the gearbox (2) (arrow)
becomes visible.
NOTICE
The gearbox may be seriously damaged
if you do not replace the wear guard in
good time.
Replacing the wear guard
N
Remove the cutting blade if
necessary – see "Replacing the
Cutting Blade".
N
Remove screws (3) with a standard
T 20 Torx screwdriver.
N
Fit the new wear guard (1).
N
Insert the screws and tighten them
down firmly.
N
Mount the cutting blade – see
"Replacing the Cutting Blade".
Checking and Replacing the
Wear Guard
1
9924BA016 KN
2
3
9924BA020 KN
3
