FS 300, FS 350, FS 380
English
72
Control handle on drive tube
1
Throttle trigger lockout
2
Throttle trigger
3
Slide control
Positions of slide control
4
STOP-0 – engine off – ignition is
switched off
5
F
– normal run position – the engine
is running or can start
6
START – ignition is switched on –
the engine can start
Symbol on slide control
7
h
– stop symbol and arrow. To stop
the engine, push the slide control in
the direction of the arrow on the stop
symbol (
h
) to STOP-0.
Starting
N
Press down the trigger lockout lever
and squeeze the throttle trigger
N
and hold them in that position.
N
Move the slide control to START
and hold it there.
N
Now release the throttle trigger,
slide control and trigger lockout
lever in that order. This is the
starting throttle position.
N
Set the choke knob (8) to:
N
Press the manual fuel pump
bulb (9) at least five times – even if
the bulb is filled with fuel.
Cranking
N
Place the unit on the ground: It must
rest securely on the engine support
and the deflector.
N
If fitted: Remove the transport guard
from the cutting attachment.
To reduce the risk of accidents, check
that the cutting attachment is not
touching the ground of any other
obstacles.
N
Make sure you have a firm footing,
either standing, stooping or
kneeling.
N
Hold the unit firmly on the ground
with your left hand and press down
– do not touch the throttle trigger,
lockout lever or slide control.
NOTICE
Do not stand or kneel on the drive tube.
3
STOP
2
5
6
4
7
002BA181 KN
START
STOP-
1
g
if the engine is cold
e
for warm start – also use this posi
-
tion if the engine has been running
but is still cold.
250BA018 KN
9
8
002BA038 KN
002BA040 KN
Summary of Contents for FS 350
