0458-833-9821-A
37
English
7 Assembling the Trimmer
► Fit and tighten down the nuts (7) firmly.
7.4 Mounting and Removing the Mowing Head
7.4.1 AutoCut C 6-2 mowing head
Mounting the Mowing Head
► Switch off the brushcutter and remove the battery.
► Position the mowing head (1) on the shaft (2).
► Hold the mowing head (1) with your hand.
► Manually rotate the cap (3) clockwise and tighten it.
Removing the Mowing Head
► Switch off the brushcutter and remove the battery.
► Hold the mowing head with your hand.
► Manually rotate the cap counterclockwise until the mowing
head can be removed.
7.4.2 PolyCut 6-2 mowing head
Mounting the Mowing Head
► Switch off the brushcutter and remove the battery.
► Position the mowing head (1) on the shaft (2).
► Hold the mowing head (1) with your hand.
► Manually rotate the upper part (3) clockwise and tighten it.
Removing the Mowing Head
► Switch off the brushcutter and remove the battery.
► Hold the mowing head with your hand.
► Manually rotate the upper part counterclockwise until the
mowing head can be removed.
7.4.3 DuroCut 5-2 mowing head:
Mounting the Mowing Head
► Switch off the brushcutter and remove the battery.
► Place the thrust plate (2) on the shaft (3) so that its smaller
diameter faces up.
► Position the mowing head (1) on the shaft (3).
3
1
2
1
0000097534_001
3
1
2
1
0000097546_001
1
4
1
2
3
0000097552_001