4.5
30° angle drive (special acces‐
sory)
1
2
0000097201_001
The angle drive keeps the cutting attachment at
an angle of 30° to the shaft.
The angle drive may be adjusted on the shaft to
the following positions only:
1 for cross-cutting vertical branches and
bushes
2 for a better view of the cutting attachment
5
Approved KombiEngines
5.1
KombiEngines
Only use KombiEngines supplied or explicitly
approved by STIHL for use with the attachment.
This KombiTool may be operated only in combi‐
nation with the following KombiEngines:
STIHL KM 56 R, KM 85 R KM 94 R, KM 111 R,
KM 131 R, KMA 130 R, KMA 135 R
WARNING
Loop-handled machines must be equipped with
a barrier bar.
5.2
Brushcutters with split boom
The KombiTool can also be fitted to STIHL
brushcutters with a split shaft (T-models) (basic
power tools).
This KombiTool can therefore also be used on
the following machine:
STIHL FR 131 T
WARNING
Refer to the User Manual of the power tool for
use of the barrier bar.
6
Assembling the Unit
413BA014 KN
► Pull the protective caps off the ends of the
shaft and keep them in a safe place for later
use – see "Storing the Machine"
002BA248 KN
5 Approved KombiEngines
English
0458-473-0121-E
9
