0000-GXX-0510-A0
8
► Place the secured assembly on the handle
support (8) with the wing screw at the side
nearest the engine.
► Push the wing screw into the handle support
as far as stop and then screw it down – but do
not finally tighten yet.
► Line up the handlebar at a right angle to the
drive tube – check distance A again.
► Tighten down the wing screw firmly.
6.1.3
Mounting the Control Handle
13
9
11
12
7
13
0000-GXX-051
1-A0
10
► Take out the screw (9) – the nut (10) remains
in the control handle (11).
► Push the control handle onto the handlebar (7)
until the holes (13) line up – the throttle trig‐
ger (12) must point towards the gearbox.
► Insert the screw (9) and tighten it down firmly.
6 Mounting the Bike Handle
English
0458-436-0121-B
9