MS 193 T
English
37
EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
Engine
STIHL single cylinder two-stroke engine
Ignition System
Electronic magneto ignition
This spark ignition system meets all
requirements of the Canadian
Interference-Causing Equipment
Standard CAN ICES-2/NMB-2.
Fuel System
All position diaphragm carburetor with
integral fuel pump
Chain Lubrication
Fully automatic, speed-controlled oil
pump with rotary piston. Additional
manual oil flow control
Weight
dry, without bar and chain:
Cutting Attachment
Actual cutting length may be less than
the specified length
STIHL cutting attachments complying
with CSA Standard Z 62.3:
Rollomatic guide bar
3/8" Picco chain
Chain sprockets
Other cutting attachments
Other cutting attachments complying
with CSA Standard Z 62.3 are available:
see section CSA Standard Z 62.3, the
"Chain Leaflet" inside the chain box or
contact your local STIHL dealer.
Please ask your STIHL dealer to
properly match your powerhead with the
appropriate bar/chain combinations to
reduce the risk of kickback injury.
Specifications
A = 300 hours
B = 125 hours
C = 50 hours
Displacement:
30.1 cc
Bore:
37 mm
Stroke:
28 mm
Engine power to
ISO 7293:
1.3 kW at
10,500 rpm
Idle speed:
3,000 rpm
Max. permissible
speed (with cutting
attachment):
13,000 rpm
Spark plug (resistor
type):
NGK CMR 6H
Electrode gap:
0.5 mm
Fuel tank capacity:
270 cc (0.27 l)
Oil tank capacity:
220 cc (0.22 l)
MS 193 T:
3.3 kg
Bar lengths
1)
(3/8" P
pitch):
10", 12", 14", 16"
Groove width:
1.1 mm
1)
Actual cutting length may be less
than the specified length
Picco Micro Mini 3 (61 PMM3)
Type 3610
Pitch:
3/8" P
(9.32 mm)
Drive link gauge:
1.1 mm
6-tooth for 3/8" P (spur sprocket)
