103
MS 271 C, MS 291 C
:
Check the retainer (1), push it out
of its seat and replace if
necessary.
– Reassemble in the reverse
sequence.
– Install new fuel suction hose and
new fuel return hose,
b
12.11.3
Installing
:
Position the fuel pump (1) so that
the lug (3) points towards the
recess (arrow).
:
Push the fuel pump (1) into the
retainer (2) until the tabs engage.
5902RA513 TG
1
5902RA505 TG
1
3
2
:
Push the fuel return hose (1) onto
the long nipple (3) and the fuel
suction hose (2) onto the short
nipple (4) on the fuel pump.
– Check operation
– fuel must flow when the fuel
pump is operated.
– Reassemble all other parts in the
reverse sequence.
12.11.5 Tank Housing
– Drain the fuel tank,
b
1
– Remove the handlebar,
b
9.5
– Remove the carburetor,
b
12.5
– Remove the carburetor carrier,
– On models with QuickStop
Super, disconnect the brake
cable from the brake lever
b
5.4.2
– Remove the stop buffer,
b
9.4
– Remove the control levers,
– Lower the tank housing a little,
b
12.11.2
5902RA506 TG
2
1
4
3
:
Pull the fuel hose (1) downwards
and out through the
opening (arrow).
Models with manual fuel pump
:
Pull out the connector (1) with
fuel return hose (2).
:
Press out the fuel return hose (1)
in direction of tank housing.
2710RA277 TG
1
2710RA266 TG
2
1
2710RA303 TG
1
