22
MS 271 C, MS 291 C
5.3
Brake Lever
– Troubleshooting,
– Remove the brake band,
b
5.2
– Engage the chain brake.
The brake spring is now relaxed.
:
Use the assembly tool
1117 890 0900 to disconnect the
brake spring (1) from the anchor
pin (arrow).
– Remove the brake spring from
the brake lever.
– Remove the shroud,
b
6.4
– Remove the fan housing,
b
8.2
:
Remove the retaining ring (1).
off
2710RA019 TG
1
2710RA020 TG
1
:
Pull the hand guard (1) and brake
lever (2) off the pivot
pins (arrows) together.
– Remove the hand guard and
brake lever.
:
Remove the spacer washer (1)
and strap (2).
:
Take the brake lever (2) out of the
hand guard (1).
– Inspect the pivot pins and replace
– Inspect the cam lever and
replace if necessary,
b
5.5
2710RA021 TG
1
2
off
2710RA022 TG
2
1
5902RA034 TG
1
2
Installing
– Clean the pivot pins and
– Lubricate the pivot pins,
:
Push the strap (1), outside
radius (arrow) facing up, onto the
pins (2) and (3).
:
Slip the spacer washer (1) onto
the pin (2).
2710RA023 TG
1
2
3
2710RA024 TG
2
1
