MS 290, MS 310, MS 390
English
23
N
Grip the filler cap – if the filler cap
cannot be moved or removed, then
it is closed properly
If the filler cap can be moved or removed
The base of the filler cap is twisted in
relation to the upper part.
N
Fit filler cap and turn it
counterclockwise until it engages in
the seat of the filling port
N
Continue to turn the filler cap
counterclockwise (approx. 1/4 turn)
– this will twist the base of the cap
into the correct position
N
Turn the filler cap clockwise and
close it – see the section "Closing"
and "Checking the lock"
Filler cap with marking
To open:
N
Open bracket
N
Turn filler cap (approx. 1/4 turn)
Markings on filler cap and fuel tank must
align
N
Remove the filler cap
Filling with fuel
Take care not to spill fuel while fueling
and do not overfill the tank.
STIHL recommends using the STIHL
filling system for fuel (special
accessory).
N
Fill with fuel
left:
Base of filler cap twisted
right:
Base of filler cap correctly
positioned
001BA225 KN
001BA227 KN
001BA226 KN
001BA236 KN
001BA232 KN
001BA234 KN
001BA237 KN