Stihl MS 361, Instruction Manual

30.9

Exhaust Emissions

The CO

2

value measured in the EU type approval

procedure is specified at www.stihl.com/co2.
The measured CO

2

value was determined on a

representative engine in accordance with a

standardized test procedure under laboratory

conditions and does not represent either an

explicit or implied guarantee of the performance

of a specific engine.
The applicable exhaust emission requirements

are fulfilled by the intended usage and mainte‐

nance described in this instruction manual. The

type approval expires if the engine is modified in

any way.

31 Ordering Spare Parts

Please enter your saw model, serial number as

well as the part numbers of the guide bar and

saw chain in the spaces provided. This will make

re-ordering simpler.
The guide bar and saw chain are subject to nor‐

mal wear and tear. When purchasing these

parts, always quote the saw model, the part

numbers and names of the parts.
Model

                         
Serial number

                         
Guide bar part number

                         
Chain part number

32 Maintenance and Repairs

Users of this machine may only carry out the

maintenance and service work described in this

user manual. All other repairs must be carried

out by a servicing dealer.
STIHL recommends that you have servicing and

repair work carried out exclusively by an author‐

ized STIHL servicing dealer. STIHL dealers are

regularly given the opportunity to attend training

courses and are supplied with the necessary

technical information.
When repairing the machine, only use replace‐

ment parts which have been approved by STIHL

for this power tool or are technically identical.

Only use high-quality replacement parts in order

to avoid the risk of accidents and damage to the

machine.

STIHL recommends the use of original STIHL

replacement parts.
Original STIHL parts can be identified by the

STIHL part number, the 

{

 logo and the

STIHL parts symbol 

K

 (the symbol may appear

alone on small parts).

33 Disposal

Observe all country-specific waste disposal rules

and regulations.

000BA073 KN

STIHL products must not be thrown in the gar‐

bage can. Take the product, accessories and

packaging to an approved disposal site for envi‐

ronment-friendly recycling.
Contact your STIHL servicing dealer for the lat‐

est information on waste disposal.

34 EC Declaration of Con‐

formity

ANDREAS STIHL AG & Co. KG

Badstr. 115

D‑71336 Waiblingen
Germany
declares under our sole responsibility that
Designation:

Chainsaw

Make:

STIHL

Series:

MS 361

Serial identification number: 1135
conforms to the relevant provisions of Directives

2011/65/EU, 2006/42/EC, 2014/30/EU and

2000/14/EC and has been developed and manu‐

factured in compliance with the following stand‐

ards in the versions valid on the date of produc‐

tion:
EN ISO 11681‑1, EN 55012, EN 61000‑6‑1
The measured and the guaranteed sound power

level have been determined in accordance with

Directive 2000/14/EC, Annex V, and standard

ISO 9207.

31 Ordering Spare Parts

English

0458-212-0121-C

39