MSA 160 T
English
6
–
Do not operate an easily
combustible surface (e. g., paper,
textiles) or in an easily combustible
environment – risk of fire!
–
Do not operate in a hazardous
location, i.e. in a location where
there are combustible liquids
(fumes), vapors or dusts. Chargers
can produce sparks, which may
ignite the dust or vapors – risk of
explosion!
–
Never jerk the power cord to
disconnect it from the wall outlet. To
unplug, grasp the plug, not the cord.
Have a damaged connecting cord
repaired by an experienced
electrician
–
Do not use the connecting cord for
any other purpose, e. g. for carrying
or hanging up the charger
–
Never use connecting cords that do
not comply with regulations
–
To reduce the risk of stumbling,
position and mark the connecting
cord so that it cannot be damaged
or endanger others
To reduce the risk of electric shock:
–
Always connect the cord to a
properly installed wall outlet
–
Make sure the insulation of the
power cord and plug is in good
condition
After using the charger, unplug it from
the socket.
Before starting work
Before starting work in the tree, check at
ground level that the chain saw is safe to
operate – refer to appropriate chapters
in the Instruction Manual:
–
Functional chain brake, front hand
guard
–
Correctly mounted guide bar
–
Correctly tensioned chain
–
Trigger switch and trigger interlock
must move easily – switches must
return to initial position when
released
–
Trigger switch is locked when the
trigger interlock is not depressed
–
Never attempt to modify the controls
or safety devices in any way
–
Keep the handles dry and clean –
free from oil and dirt – for safe
control of the chain saw
–
Sufficient chain oil in the tank
–
Check contacts in the battery
compartment of the chain saw for
foreign matter and dirt
–
Fit the battery correctly – it must
engage audibly
–
Do not use defective or deformed
batteries
The chain saw should only be used if it
is in full working order – risk of accident!
Switching on the chain saw
Ensure a firm and secure footing. Hold
the chain saw securely.
Your chain saw is a one-person saw. Do
not allow other persons to be near the
running pole pruner.
Do not activate the trigger switch if the
saw chain is in a cut.
Switch on as described in the Instruction
Manual – see "Switching on the
machine".
During operation
When working in a tree, always secure
the tree surgery chain saw with a rope –
attach rope to the ring on the back of the
chain saw.
Check the charger's con
-
necting cord regularly for
damage. If the power
cord is damaged, imme
-
diately disconnect the
plug from the wall outlet –
risk of electric shock!
Summary of Contents for MSA 160 T
