0478 131 8349 A - EN
40
3. Time:
The current time is indicated in 24 hour
format.
4. Mobile radio signal:
The
signal strength
of the
mobile radio connection is
indicated using 4 bars. The
more bars visible, the better
the reception.
A reception symbol with a
small x indicates that there is
no connection with the
Internet.
A question mark is shown
during initialisation of the radio module
(checking hardware and software – e.g.
after switching on the robotic mower).
11.4 Main menu
The main menu is displayed,
– by pressing the OK button
11.2) the status screen is quit,
– when the "Main menu" command is
activated,
– when the Back button is pressed in the
second menu level.
1. Commands
Main menu
Lock iMow
Switch automatic mowing on and off
Drive to docking station
Hand control
Start mowing
Start time-delayed mowing
Skip next active time
Edge mowing
Display weekly plan, edit active
times and mowing duration
3. Information
Messages
Events
iMow status
Lawn status
Radio module status (RMI 632 C,
RMI 632 PC)
4. Settings
iMow
Installation
Safety
Service
Dealer area
11.5 Commands
Select the required command using the
control pad and execute by pressing OK.
1.
Main menu
2.
Lock iMow
3.
Switch on automatic mowing/Switch off
automatic mowing
4.
Drive to docking station
5.
Manual mowing
6.
Start mowing
7.
Start time-delayed mowing
8.
Skip next active time
9.
Edge mowing
1. Main menu:
OK takes you back to the main
menu.
2. Lock iMow:
Activate the disabling device
.
Press the illustrated button
combination to unlock. (
3. Switch on automatic
mowing/
Switch off automatic mowing:
When
automatic mowing is
switched on
, the text "Automatic switched
on" appears in the status screen and the
automatic symbol is displayed next to the
battery symbol in the menus. The robotic
mower mows the mowing area fully
automatically.
When
automatic mowing is switched
off
, the text "Automatic switched off"
appears in the status screen and the active
times are shown as inactive (greyed out) in
the mowing plan. The mowing area is not
mown automatically. Mowing operations
can be initiated via the commands "Start
mowing" or "Start time-delayed mowing".