EN
47
0478 131 8349 A - EN
11.16 Safety
1.
Disabling device
2.
Level
3.
GPS protection (RMI 632 C,
RMI 632 PC)
4.
Change PIN code
5.
Start signal
6.
Alarm signal
7.
Menu signal
8.
Child lock
9.
Keylock
10.
Link iMow and dock
1. Disabling device:
The disabling device is activated
with OK; the robotic mower can no
longer be operated.
The robotic mower must be disabled prior
to any maintenance or cleaning work, prior
to transportation and prior to inspection.
(
●
To deactivate the disabling
device, press the illustrated
button combination (Mow button
and OK button).
2. Level
:
Four safety levels can be set;
various locks and safety devices are
activated, depending on the level.
–
None
:
The robotic mower is unprotected.
–
Low
:
The anti-theft alarm is active; a PIN
code must be entered in order to link the
robotic mower and docking station, and
to reset the machine to the default
settings.
–
Medium
:
As "Low", but the time lock is also
active.
–
High
:
As "Medium", but settings can also only
be changed following entry of the PIN
code.
●
Select the required level and confirm
with OK; enter the 4-digit PIN code if
necessary.
Anti-theft alarm
:
If the mower is lifted or tilted by the handle
for longer than 10 seconds, the PIN query
appears. If the PIN code is not entered
within one minute, an alarm sounds and
automatic operation is switched off.
Connection lock
:
PIN code query prior to linking of the
robotic mower and docking station.
Reset lock:
PIN code query prior to resetting the
machine to the factory defaults.
Time lock
:
PIN code query for changing a setting if no
PIN code has been entered for more than
one month.
Setting protection
:
PIN code query when settings are
changed.
3. GPS protection
(RMI 632 C, RMI 632 PC):
For switching position monitoring on
and off. (
4. Change PIN code:
The 4-digit PIN code can be
changed if required.
●
First enter the old PIN code and confirm
with OK.
●
Then enter the new 4-digit PIN code
and confirm with OK.
5. Start signal:
For switching on and off the acoustic
signal that sounds when the mowing
blade is activated.
6. Alarm signal:
For switching on and off the acoustic
signal that sounds when the robotic
mower hits an obstacle.
The
docking station
is
defined as
starting point 0
;
mowing operations are
started from here as standard.
The starting frequency corresponds
to the calculated residual value of
10 of 10 operations.
Recommendation:
Set the safety level to "Low",
"Medium" or "High".
Recommendation:
Always switch on GPS protection.
Before switching on, enter the
mobile phone number
of the
the safety level "Low", "Medium" or
"High" on the robotic mower.
The "Change PIN code" menu item
is only displayed in the safety levels
"Low", "Medium" or "High".
Recommendation:
Write down the new PIN code.
If the PIN code is entered
incorrectly 5 times, a 4-digit
master
code
is required, otherwise
automatic operation is switched off.
For the creation of a master code,
you must provide your specialist
dealer with the 9-digit serial number
and the 4-digit date, which are
displayed in the selection window.
