SG 11 , SG 11 PLUS
English
7
Releasing Pressure in Tank
N
Turn the knurled wheel (1) as far as
stop and hold it there until the tank
is no longer under pressure.
Emptying Tank and Cleaning the
Sprayer
N
Empty the tank in a well ventilated
location.
N
Rinse the tank with clean water.
N
Fill the tank with clean water.
N
Fit the cover on the tank and tighten
it down firmly.
N
Pressurize the tank and continue
spraying until the tank is empty and
no longer under pressure.
Lubricating the O-rings
N
Unscrew the pump barrel and pull it
off the piston.
After frequent use, lubricate the
following O-rings with food-safe grease:
–
O-ring (1) between pump barrel and
cover.
–
O-ring (2) on pump piston.
N
Seat of O-ring (1) between pump
barrel and cover.
N
Slide the piston into the pump
barrel. Screw the pump barrel into
the cover and tighten it down firmly.
Cleaning the Nozzle
N
Rinse the nozzle under running
water.
After Spraying
1
0076BA009 AS
Inspection and Maintenance
by User
0076BA01
3 ST
1
2
0076BA016 KK
