background image

BG 56, BG 56 C, BG 66, BG 66 C, BG 86, BG 86 C, SH 56, SH 56 C, SH 86, SH 86 C

English

3

The user is responsible for avoiding 

injury to third parties or damage to their 

property.
Do not lend or rent your power tool 

without the instruction manual. Be sure 

that anyone using your power tool 

understands the information contained 

in this manual.
The use of noise emitting power tools 

may be restricted to certain times by 

national or local regulations.
Do not operate your unit if any of its 

components are damaged.
Do not use a pressure washer to clean 

the unit. The solid jet of water may 

damage parts of the unit.

Accessories and Spare Parts

Only use parts and accessories that are 

explicitly approved for this power tool by 

STIHL or are technically identical. If you 

have any questions in this respect, 

consult a servicing dealer. Use only high 

quality parts and accessories in order to 

avoid the risk of accidents and damage 

to the unit.
STIHL recommends the use of genuine 

STIHL replacement parts. They are 

specifically designed to match the 

product and meet your performance 

requirements.
Never attempt to modify your unit in any 

way since this may increase the risk of 

personal injury. STIHL excludes all 

liability for personal injury and damage 

to property caused while using 

unauthorized attachments.

Physical Condition

To operate the unit you must be rested, 

in good physical condition and mental 

health.
If you have any condition that might be 

aggravated by strenuous work, check 

with your doctor before operating a 

power tool.
Persons with pacemakers only: The 

ignition system of your power tool 

produces an electromagnetic field of a 

very low intensity. This field may 

interfere with some pacemakers. To 

reduce health risks, STIHL recommends 

that persons with pacemakers consult 

their physician and the pacemaker 

manufacturer before operating this tool.
Do not operate the power tool if you are 

under the influence of any substance 

(drugs, alcohol) which might impair 

vision, dexterity or judgment.

Applications

The blower is designed for blow-

sweeping leaves, grass, paper and 

similar materials, e.g. in gardens, sports 

stadiums, car parks and driveways. It is 

also suitable for blow-sweeping forest 

paths.
The vacuum shredder is designed for 

picking up dry leaves and other 

lightweight, loose and non-combustible 

materials.
Do not blow-sweep or vacuum 

hazardous materials.
Do not use the power tool for any other 

purpose because of the increased risk of 

accidents and damage to the power tool 

itself. Never attempt to modify the 

product in any way since this may result 

in accidents or damage to the product.

Clothing and Equipment

Wear proper protective clothing and 

equipment.

Wear sturdy shoes with non-slip soles.

STIHL offers a comprehensive range of 

personal protective clothing and 

equipment.

Transporting the Unit

Always stop the engine.
Transporting in a vehicle:

Properly secure your power tool to 

prevent turnover, fuel spillage and 

damage.

Clothing must be sturdy 

but allow complete free

-

dom of movement. Wear 

snug-fitting clothing, an 

overall and jacket combi

-

nation, do not wear a 

work coat.
Avoid any clothing, 

scarves, neckties, jewel

-

lery or anything that could 

get into the air intake. Tie 

up and confine long hair 

(e.g. with a hair net, cap, 

hard hat, etc.).

Wear safety glasses and 

hearing protection, e.g. 

earplugs or ear muffs.

Summary of Contents for SH 56

































Reviews: