background image

SP-KM

English

16

Users of this machine may only carry out 

the maintenance and service work 

described in this user manual. All other 

repairs must be carried out by a 

servicing dealer.
STIHL recommends that you have 

servicing and repair work carried out 

exclusively by an authorized STIHL 

servicing dealer. STIHL dealers are 

regularly given the opportunity to attend 

training courses and are supplied with 

the necessary technical information.
When repairing the machine, only use 

replacement parts which have been 

approved by STIHL for this power tool or 

are technically identical. Only use high-

quality replacement parts in order to 

avoid the risk of accidents and damage 

to the machine.
STIHL recommends the use of original 

STIHL replacement parts.
Original STIHL parts can be identified by 

the STIHL part number, the 

{

 

logo and the STIHL parts symbol 

K

 

(the symbol may appear alone on small 

parts).

Observe all country-specific waste 

disposal rules and regulations.

STIHL products must not be thrown in 

the garbage can. Take the product, 

accessories and packaging to an 

approved disposal site for environment-

friendly recycling.
Contact your STIHL servicing dealer for 

the latest information on waste disposal.

ANDREAS STIHL AG & Co. KG

Badstr. 115

D-71336 Waiblingen
Germany
declare in exclusive responsibility that

conforms to the relevant provisions of 

Directive 2006/42/EC and has been 

developed and manufactured in 

compliance with the following standards 

in the versions valid on the date of 

production:
EN ISO 12100 (in conjunction with the 

specified KM and KMA models).
Technical documents deposited at:
ANDREAS STIHL AG & Co. KG

Produktzulassung (Product Licensing)
The year of manufacture is applied to 

the power tool.
Done at Waiblingen, 08.03.2018
ANDREAS STIHL AG & Co. KG

Thomas Elsner
Director Product Management and 

Services

Maintenance and Repairs

Disposal

000BA073 KN

EC Declaration of Conformity

Category:

Special harvester 

KombiTool

Make:

STIHL

Model:

SP-KM

Serial identification: 4249

Summary of Contents for SP-KM





















Reviews: