106
TS 500i
– Use STIHL press fluid to simplify
assembly,
:
Push the impulse hose (1) onto
the connectors (arrow) of the
injection pump (2)
– Use STIHL press fluid to simplify
assembly,
:
Slide the fuel suction hose (1)
onto the connectors (arrow) of
the connecting element (2) and
onto the connectors (arrow) of
the injection pump (3)
1307RA219 TG
1
2
1
2
3
1307RA220 TG
– Use STIHL press fluid to simplify
assembly,
:
Push impulse hose (1), fuel
return line (2) and fuel hose (3)
onto the connectors (arrows)
– Install the engine,
– Reassemble remaining parts in
reverse order
11.8
Fuel intake
11.8.1 Pickup body
Impurities which are entrained into
the fuel tank with the fuel are
trapped by the pickup body. With
time, the fine pores in the pickup
body become clogged with very fine
dirt particles. This reduces the
intake diameter and fuel can no
longer be delivered in sufficient
quantities.
Always check the fuel tank and
pickup body first if problems
develop in the fuel supply.
– Refer also to troubleshooting
chart,
Clean the fuel tank if necessary.
1307RA221 TG
2
1
3
– Open the filler cap and drain the
tank.
– Fill a little clean gasoline into the
tank, close the tank and shake it
thoroughly.
– Reopen the tank and empty it
– Dispose of fuel in accordance
with regulations,
– Open the filler cap
:
Pull the pickup body (1) out of the
fuel tank with assembly hook (2)
5910 893 8800
Take care not to overextend the fuel
hose (3).
:
Pull the pickup body (1) off the
fuel hose (3), examine it and
clean or replace it if necessary
– Reassemble parts in reverse
order
11.8.2 Fuel hoses
– The installation or removal of the
fuel hoses is described in the
chapter "Injection pump",
1307RA142 TG
2
3
1
Summary of Contents for TS 500i
Page 1: ...STIH STIHL TS 500i 2012 02...
Page 116: ...115 TS 500i...
Page 117: ...116 TS 500i...
Page 118: ...englisch english 0455 753 0123 VA0 B12 Printed in Germany...
