11
TS 500i
3.2
Cast arm with guard
Problem
Cause
Remedy
Cutting wheel does not run
smoothly or vibrates
Axial or radial runout
Set axial or radial true running,
replace cutting wheel if necessary
Ribbed poly V-belt is loose
Check and tension ribbed poly
V-belt, replace ribbed poly V-belt or
tensioner if necessary
Grooved ball bearing of the front
poly V-belt pulley is worn
Replace ball bearing
Cutting wheel stops under load at
full throttle
Clutch shoes badly worn
Replace clutch
Clutch drum badly worn
Replace clutch drum
Ribbed poly V-belt not properly
tensioned
Tension ribbed poly V-belt, replace
if necessary
Cutting wheel rotates at idle speed
Clutch springs stretched or fatigued Replace clutch springs or replace
clutch
Anchor loops of the clutch spring
hooks are broken
Replace clutch springs
Throttle cable is jammed
Check easy movement of throttle
cable and replace if necessary
Throttle trigger is stiff
Check throttle trigger, repair if
necessary
Throttle shutter does not return
automatically
Check the throttle shutter stops and
replace throttle shutter housing if
necessary
Summary of Contents for TS 500i
Page 1: ...STIH STIHL TS 500i 2012 02...
Page 116: ...115 TS 500i...
Page 117: ...116 TS 500i...
Page 118: ...englisch english 0455 753 0123 VA0 B12 Printed in Germany...
