Stilevs MAXI CHEF PRO, Instruction Manual

13

Especially to prevent splashes when mixing 

hot liquids, do not fill the container over the 

maximum level indicator.

•  Place the cover in the blender container and 

turn it clockwise to secure it.

•  Select the appropriate speed. Never open 

the cover to insert your hand or other 

object into the container while the blender 

is running. Wait for the appliance to reach 

room temperature after using it twice.

•  When the process is finished, move the 

speed dial to “0” position and pull the plug 

of the device out of the socket.

WARNINGS:

•  Do not run blender empty.

•  NEVER place hot liquids or food in blender 

container. This could damage the blender 

blades.

•  Divide the food into small pieces before 

placing it into the blender.

•  Do not fill the blender beyond its capacity 

(1 lt.).

•  You can add from the top of the blender 

while the device is not working.

•  To break ice cubes place them in the 

container, close the cover and turn the 

speed button to P (Pulse) position.

•  It is easier to mix some ingredients such as 

fruit by adding some lemon juice.

•  When mixing soup, use cooked ingredients.

•  If you can not get the result you want, set the 

speed dial to P (Pulse) position and run the 

device a few more times for a short time.

•  While processing bubbling liquids such 

as milk be careful not to fill the blender 

container more than 500 ml to prevent 

spillage.

•  If the food sticks to the inner wall of the 

container, switch off the appliance and 

unplug. Then clean the food using a spatula.

•  Never run the blender for more than 20 

seconds.

Coffee and Spice Grinding Attachment:

•  Put the food you want to grind into the 

transparent cover of the grinder.

•  Place the grinder body on the cover upside 

down and make sure it is locked by turning 

it in the direction of the lock.

•  Place the grinder on the main body of the 

processor.

•  Make sure it is locked by turning it to the 

lock direction

•  Set the speed dial to P and start the device.

Note:

 Dry grinds such as black pepper, coffee

beans, etc. are ground at a rate of not more 

than 1 cup at a time.

HANDLING AND SHIPMENT

•  During handling and shipment, your 

appliance must be kept in original package 

in order to prevent damages to its parts.

•  Keep at normal position during shipment.

•  Do not drop the product when transporting 

and protect from impacts.

•  After delivery of the product, failures and 

damages that may occur while transporting 

are not covered by warranty.

V. CLEANING AND MAINTENANCE

•  When you are done with the appliance, 

turn off the device by setting the speed 

dial to zero “0”, and unplug.

•  It is important to wash the attachments 

after each use in order to make your 

cleaning easier. Do not leave the 

attachments in water for a long time.

•  Do not wash any of the processor 

attachments in the dishwasher.

•  After each use, wash attachments with 

soapy warm water. Do not use anything 

that may damage the surfaces of the 

appliance or attachments, such as abrasive 

detergents, dishwashers, rinse agents, and 

aerosol cleaners for cleaning.

•  Store attachments after drying them with 

a soft clean cloth.

•  Never immerse your processor body in 

any liquid. You can clean it by wiping with 

a dry/damp cloth.

•  After using the blades, wash and dry 

immediately. Be especially careful when 

washing slicing and chopping blades. 

These blades can cause serious injuries 

as they are extremely sharp. Store the 

chopping and mixing metal blade in the 

special blade guard after they are dried.

•  After processing is complete, you can store 

your device by wrapping the cable in the