background image

3

 

WARNING:

This distillation system produces a highly flammable liquid. 

PRECAUTION:

•  Always operate the Turbo 500 Distillation System in a room with adequate ventilation.
•  Do not use outdoors, as drafts affect distillation efficiency. 
•  Never leave the Turbo 500 Distillation System unattended when operating.
•  Keep the Turbo 500 Distillation System away from all sources of ignition, including    

 

 

 

smoking, sparks, heat and open flames.

•  Ensure all other equipment near the Turbo 500 Distillation System or the alcohol is earthed.
•  A fire extinguishing device suitable for alcohol should be kept nearby. This can be water fog, fine water  
 

spray, foam, dry powder, carbon dioxide, sand or dolomite.

•  Do not boil dry. In the event the still is boiled dry, reset the cut-out button under the base of the still.  
 

In the very unlikely event the electric cut-out fails, a fusible link gives an added protection. This  

 

 

fuse will melt and cut the flow of power if the temperature exceeds a safe level. It cannot be reset    

 

by the user and the boiler will need professional attention.

•  Do not distil any liquid above 40% ABV as this could cause a vacuum.

IN CASE OF SPILLAGE:

•  Shut off all possible sources of ignition.
•  Clean up spills immediately using cloth, paper towels or other absorbent material such as soil, sand or  
 

other inert material.

•  Collect, seal and dispose accordingly.
•  Mop area with excess water.

PLEASE READ ALL OF THESE INSTRUCTIONS 

CAREFULLY BEFORE USING YOUR STILL

SAFETY

Summary of Contents for TURBO 500

















Reviews: