Still RX60-16 Original Instructions Manual Download

Page: 221 / 412

Operation

Operation of additional equipment

Accident recorder (variant)

The accident recorder is an equipment variant

to the FleetManager (variant), which is in-

stalled in the truck’s acceleration sensor. The

acceleration sensor records data in the event

of an accident. This data can be electronically

read out and evaluated. For further informa-

tion, contact your STILL service centre.

Driver restraint systems (variants)

Different driver restraint systems are available

as variants for this truck. The description and

operation for these systems can be found

in the separate "Driver restraint systems"

operating instructions.

170525 EN - 10/2016

209

Summary of Contents for RX60-16





























































































































































































































































































































































































































Search results

Summary of Contents for RX60-16

Reviews:

Related manuals for RX60-16

Brands by name

Popular brands

Still RX60-16, Original Instructions Manual

Search results

Summary of Contents for RX60-16

Reviews:

Related manuals for RX60-16

Brands by name

Popular brands