Still RX60-16 Original Instructions Manual Download

Page: 88 / 412

Operation

Checks and operations prior to commissioning

6321_003-038

Adjusting the seat suspension

NOTE

The driver’s seat can be adjusted to suit the

weight of the individual driver. In order to

achieve the best seat suspension setting, the

driver should perform the adjustment whilst

sitting in the seat.

NOTE

The driver’s seat MSG 65/MSG 75 is designed

for people weighing between 45 kg and

170 kg.

NOTE

The MSG 75 seat is equipped with electric air

suspension that is activated using an electric

switch instead of the lever (3).

– Fully extend the weight-adjusting lever (3)
– Pump it up or down to set the driver’s weight.
– Return the weight adjusting lever to the

central initial position before each new lift

(audible click).

– Fully fold in the weight adjusting lever once

adjustment is complete.

NOTE

The driver’s weight has been selected cor-

rectly when the arrow (4) is in the centre of the

inspection window. If the seat does not move

any further when you pump the weight adju-

sting lever, the minimum or maximum weight

setting has been reached.

170525 EN - 10/2016

Summary of Contents for RX60-16





























































































































































































































































































































































































































Search results

Summary of Contents for RX60-16

Reviews:

Related manuals for RX60-16

Brands by name

Popular brands

Still RX60-16, Original Instructions Manual

Search results

Summary of Contents for RX60-16

Reviews:

Related manuals for RX60-16

Brands by name

Popular brands