Still RX60-25 Original Instructions Manual Download

Page: 232 / 470

Operation

Attachments

5060_003-121

5060_003-120_V2

Controlling attachments using the

triple mini-lever and the 5th function

NOTE

For technical reasons, clamping attachments

must not be controlled via the 5th function.

NOTE

The "lift mast" 360° lever and operating levers

(1) and (2) control four hydraulic functions.

The designation "5th function" refers to the

fact that the 5th hydraulic function can be

controlled with the operating lever (1) by

switching the functions using the function key

(3).

The pictograms on the operating levers show

the respective functions that are activated by

these levers.
This essentially involves the following:
– Actuate the "5th function" function key (3)

and move operating lever (1) towards (E).

The attachment moves in accordance with the

pictogram in position (E).
– Actuate the "5th function" function key (3)

and move operating lever (1) towards (F).

The attachment moves in accordance with the

pictogram in position (F).

218

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Summary of Contents for RX60-25























































































































































































































































































































































































































































































Search results

Summary of Contents for RX60-25

Reviews:

Related manuals for RX60-25

Brands by name

Popular brands

Still RX60-25, Original Instructions Manual

Search results

Summary of Contents for RX60-25

Reviews:

Related manuals for RX60-25

Brands by name

Popular brands