Still RX60-25 Original Instructions Manual Download

Page: 236 / 470

Operation

Attachments

5060_003-119

5060_003-120_V2

Controlling attachments using the

quadruple mini-lever and the 5th

function

NOTE

For technical reasons, clamping attachments

must not be controlled via the 5th function.

NOTE

Operating levers (1) to (4) are used to control

four hydraulic functions. The designation "5th

function" refers to the fact that the 5th hydraulic

function can be controlled with the operating

lever (3) by switching the functions using the

"5th function" function key (5).

The pictograms on the operating levers show

the respective functions that are activated by

these levers.
This essentially involves the following:
– Actuate the "5th function" function key (5)

and move operating lever (3) towards (E).

The attachment moves in accordance with the

pictogram in position (E).
– Actuate the "5th function" function key (5)

and move operating lever (3) towards (F).

The attachment moves in accordance with the

pictogram in position (F).

222

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Summary of Contents for RX60-25























































































































































































































































































































































































































































































Search results

Summary of Contents for RX60-25

Reviews:

Related manuals for RX60-25

Brands by name

Popular brands

Still RX60-25, Original Instructions Manual

Search results

Summary of Contents for RX60-25

Reviews:

Related manuals for RX60-25

Brands by name

Popular brands