Still RX60-25 Original Instructions Manual Download

Page: 248 / 470

Operation

Attachments

+ F

Joystick 4Plus

– To open the clamp locking mechanism,

press and hold the shift button "F"(3).

– While doing so, move the horizontal rocker

button (1) to the left.

– Keep the shift button "F" (3) pressed down

and move the horizontal rocker button (1)

back to the neutral position.

The LED (2) lights up.
– While holding down the shift button "F",

move the horizontal rocker button (1) to the

left again within 1 second.

The LED (2) lights up as long as the clamp

locking mechanism is released.

NOTE

The hydraulic function for opening the clamp

is available for one second after the clamp

locking mechanism is released. After one

second, the clamp locking mechanism is

automatically reactivated.

It is not necessary to release the clamp locking

mechanism in order to close the clamp.
– To close the clamp locking mechanism,

press and hold the shift button"F"(3).

– While doing so, move the horizontal rocker

button (1) to the right.

The clamp closes.

234

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Summary of Contents for RX60-25























































































































































































































































































































































































































































































Search results

Summary of Contents for RX60-25

Reviews:

Related manuals for RX60-25

Brands by name

Popular brands

Still RX60-25, Original Instructions Manual

Search results

Summary of Contents for RX60-25

Reviews:

Related manuals for RX60-25

Brands by name

Popular brands