NOTE
If an electrical fault occurs in the accelerator,
the drive unit switches off. The truck is braked
by the regenerative brake. Once the electrical
fault has been corrected, it will be possible to
drive the truck again by releasing the acceler-
ator pedal and then actuating the accelerator
pedal again. If the truck still cannot be operat-
ed, park the truck securely and contact the
authorised service centre.
Starting drive mode, dual pedal
version (variant)
DANGER
Risk to life if the truck rolls away or tips over!
–
Sit on the driver's seat.
–
Fasten the seat belt.
–
Activate the available restraint systems.
Observe the information in the chapter entitled
"Safety regulations when driving".
The driver's seat has a seat switch that
checks whether the driver's seat is occupied.
The truck cannot be moved if the driver's seat
is not occupied or if the seat switch malfunc-
tions. All lifting functions are disabled. The
SEAT SWITCH
message appears on the dis-
play-operating unit.
–
Lift the fork carriage until the necessary
ground clearance is achieved.
–
Tilt the lift mast backwards.
–
Release the parking brake.
Operating
4
Driving
137
56358042501 EN - - 11
Summary of Contents for RX60-60
