Safety Features | Stiltz Trio+ Homelift
There is a phone handset located
underneath the control, panel inside the
cabin, which will enable immediate contact
in case of emergency.
Safety Brake, Motor
and Gear Brake
In the event of any rope related issues, an
integrated brake system will stop the lift. The
safety brake stops the lift immediately, in the
unlikely event of a hoist rope failure. If any of
these safety features are activated, they must
be disengaged and reset by a Stiltz Homelift
service technician.
Emergency Power Supply
In the event of a power failure occurring whilst
the lift is in operation, the emergency power
supply and emergency lights will activate
automatically. The lift can be moved down to
the lower floor on emergency power by using
the normal lift controls. If this happens, the
button which moves the lift to the upper floor
will be disabled. All safety features remain
fully operational while lowering the lift on
emergency power.
To ensure that the emergency power supply
is charged at all times, the lift's power plug
should never be disconnected from the mains.
Phone model may vary.
