12
MODEL: SCF142WE | PRODUCT CODE: 62330 | 10/2018
Using Your Chest Freezer Cont.
• Swapping the Unit from Freezer to Fridge: While in freezer mode, press the Temperature Adjustment
button (Fig. 1, C) until the display shows -24º C / -11º F. Pressing the Temperature Adjustment button (Fig.
1, C) again will convert the freezer into a fridge and the display will show 1º C / 34º F.
• Swapping the Unit from Fridge to Freezer: While in fridge mode, press the Temperature Adjustment button
(Fig. 1, C) until the display shows 10º C / 50º F. Pressing the Temperature Adjustment button (Fig. 1, C)
again will convert the fridge into a freezer and the display will show -12º C / 10º F.
• Adjusting the Temperature while in Freezer mode: Press the Temperature Adjustment button (Fig. 1, C) to
change the set temperature. For each press of the button, the set temperature will drop by -1º C / º F.
• Adjusting the Temperature while in Fridge mode: Press the Temperature Adjustment button (Fig. 1, C) to
change the set temperature. For each press of the button, the set temperature will go up by 1º C / º F.
NOTE: The unit may not work at the set temperature on particularly hot days, or if the lid is opened too
frequently. To ensure efficient operation, do not open the lid unnecessarily or for prolonged periods of time.
NOTE: When the unit is set to -24º C / -11º F, the compressor will continuously run.
IMPORTANT:
Once the unit has started, continuous operation is recommended. Please try and avoid turning
the unit off and on as this may affect the service life.
• Quick Freeze Mode: To enter Quick Freeze Mode press the Quick Freeze button (Fig. 1, D). The Quick
Freeze indicator light will light up (Fig. 1, E). To exit Quick Freeze Mode, press the Quick Freeze button
(Fig. 1, D). The Quick Freeze indicator light will then go out.
NOTE: If running in Quick Freeze Mode for a continuous 24 hours, the unit will automatically exit the mode as
a safeguard.
• High Temperature Alarm: The High Temperature indicator light (Fig. 1, A) will illuminate if the unit rises
above a set temperature and your food may be at risk of spoiling. This may be caused by the lid not being
closed properly, by a fault in the unit or a number of other causes. Please contact our after sales support
on 1300 11 43 57 if this is an issue you cannot resolve.
• Power Off Memory: In case of power failure, the previous settings will be memorised until the power
returns.
• Failure Code: When the failure code
E2
appears on the display screen it means that the temperature
sensor has failed. Please contact the after sales support on 1300 11 43 57.
