Stirling GYJ70-78F3E, Instruction Manual

17

AFTER SALES SUPPORT

1300 886 649

info@tempo.org

AUS

MODEL: GYJ70-78F3E     PRODUCT CODE: 48141   06/2015

Suggested drying times

Drying Capacity

Drying Time

Regular

Airing

Approximately 2kg

Approximately 60min.

Approximately 90min.

Approximately 3kg

Approximately 90min.

Approximately 150min.

Approximately 4.5kg

Approximately 150min.

Approximately 6.5kg

Approximately 200min.

Drying times can be affected by many factors, such as type of material, bulkiness of 
the items, how full the dryer is, etc. The above list is only a guide.

Instructions (Cont.)

CAUTION!

Never stop the clothes dryer before the end of the drying cycle, unless you remove 

all items quickly and spread them out so that the heat is dissipated.

Temperature Button

Press this button, repeatedly, to select one of the following three heat settings. The 
respective lights above the button will illuminate, indicating which setting has been 
selected. 

•  Regular: Strong heating. On this setting the dryer is working with two sets of 

heating elements running simultaneously, providing the strongest hot airflow.

•  Half: Medium heating. On this setting the dryer is working with two sets of 

heating elements for 10 minutes, then with one set of elements for another 10 
minutes, then with two sets again, and so on.

•  Airing: Lukewarm. On this setting the dryer is working with only one set of 

heating elements running, providing the weakest hot airflow.

Start/Pause Button

Press this button to start the set drying program. The light above the button will 
illuminate, indicating that the dryer has started running. 
NOTE:  The dryer will not work until this button is pressed. You will have to press the 

Start/Pause button again, after closing the door, if you opened the dryer’s 

door during operation.

Lock

When the dryer is running, press the 

Programs and Temperature buttons 

simultaneously and hold for 3 seconds 

to lock all buttons. In locked state, the 

buttons’ programming functions will not work if pressed.
To unlock the buttons, press the Programs and Temperature buttons 

simultaneously and hold for 3 seconds.