AUS
AFTER SALES SUPPORT
MODEL: JK-115C-WH / JK-115C-GR / JK-115C-O PRODUCT CODE: 709609 08/2022
1300 112 534
tempo.org/support
10
Using the kettle
• Positioning the power base:
Position the base as close to a wall socket as
possible. Route the power cord so that it does not overhang the work surface
and cannot be caught accidentally. Shorten the cord by winding it round the
cord storage area under the base and lead it out through the cord exit slot.
• Filling:
Grip it by the lid knob and pull it straight up. Ensure the filter sits
securely behind the spout. Fill the kettle with the desired amount of cold tap
water. When replacing the lid, press it down firmly.
Make sure to fill the kettle at least to the minimum level (1 L) but not beyond
the maximum level (1.7 L). Too little water will result in the kettle turning off
before the water has boiled (because of the boil-dry protection). Too much
water will result in boiling water spilling out of the spout when boiling.
• Positioning:
Before positioning the kettle on the power base, ensure the
lid is securely closed and that the power switch is in the OFF position (up).
Carefully position the kettle on the power base so that any steam is directed
away from you, taking care not to spill any water onto the base.
WARNING:
Do not operate the kettle unless the element is fully immersed.
• Switching on:
With dry hands, plug the power base into an appropriate wall
outlet and turn on power at the outlet.
Press the ON/OFF switch down. The indicator light in the power switch will
light up and the water will start heating up.
Do not open the lid during use.
The kettle will automatically turn itself off when the water has boiled.
• Pouring:
Wait until the water has completely stopped bubbling before
pouring. Grip the handle and lift the kettle off the power base.
CAUTION:
Take care when pouring the water to avoid scalding from boiling
water or hot steam. Do not open the lid while the water in the kettle is hot.
• Stop heating:
To stop the heating process any time during operation, push
the power switch upwards to the OFF position.
• Re-boiling water:
To re-boil the water, allow the kettle to cool for 15–20
seconds before pressing the power switch down again.
• After use:
The kettle may be stored on the power base but make sure the
power supply is turned off when the kettle is not in use.
Instructions
CAUTION!
Take care when pouring boiling water to avoid scalding. Do not open the lid while
the water in the kettle is hot. If refilling after boiling water is required, pull the lid
straight up and move it out of the steam as soon as it separates from the kettle.
