13
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS
MODEL: SORHP1-RH PRODUCT CODE: 49157 05/2015
Top-mounting in a cabinet
• Determine where in the top cabinet you want to install the rangehood,
then drill 6 holes of Ø4mm at the bottom of the hanging board of your
cabinet (Fig. 6).
Installation (Cont.)
Fig. 6
Fig. 7
Top cabinet
Rangehood
Fascia
• Install the rangehood onto the bottom of the cupboard and secure it in
place with the six M4x35mm screws and washers (Fig. 7).
• If there is a space between the wall and the rear of the rangehood, install
the fascia using the two ST3x12mm screws.
WARNING:
Failure to install the screws or fixing device in accordance with
these instructions may result in electrical hazards!
Screws (max. length must
not exceed 12mm)