14
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS
MODEL: SORHP1-RH PRODUCT CODE: 49157 05/2015
Switching on/off
• Make sure the rangehood is properly connected to the power supply and
the power is switched on at the outlet.
• Pull out the front panel to reveal the switches at the front right hand corner
of the rangehood (Fig. 8).
• The top switch operates the light.
Press it to the “
” position and the light will switch on.
Press it to the “ 0 ” position and the light will switch off.
• The bottom one is the operation switch.
Press it to the “ I ” position for low or to “ II ” for high suction power.
In the neutral “ 0 ” position the motor will be off.
• After use, simply push the front panel back in and the fan and light will
stop working.
NOTE:
We recommend leaving the rangehood in operation for 15 minutes
after cooking in order to completely eliminate cooking vapours and
odours.
• The next time you pull the front panel back out, the rangehood will start
working at the previously set level.
Instructions
Fig. 8
NOTE:
After the rangehood has been properly installed, insert the power
plug into an appropriate electrical outlet and let the unit run for a few
minutes prior to using it while cooking.