17
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS
MODEL: SORHP1-RH PRODUCT CODE: 49157 05/2015
Other Useful Information (Cont.)
To install the charcoal filters, proceed as follows:
• Slide out the front panel of the rangehood and take out the inner aluminium
mesh filter: push in the plastic opening latch and take the filter out of its
frame, as illustrated in Fig. 9, opposite.
• Remove the outer mesh filter the same way.
• Put the activated charcoal filter into the unit and turn it in clockwise
direction to secure in place (Fig. 10, A). Repeat the same on the other side.
• Put the aluminium mesh filters back into position.
• To remove a charcoal filter, remove the aluminium mesh filters, then turn
the charcoal filter in anticlockwise direction to remove it (Fig. 10, B).
NOTE:
The suction power will be lowered with charcoal filters installed.
Fig. 10
A
B
Charcoal filters
If you are using the rangehood with the air recirculating back into the room,
you should also have installed the set of charcoal filters (supplied), as in
recirculating mode steam and odour is circulated through the cupboard back
into the room.
A charcoal filter absorbs cooking odours and must be changed regularly. How
often you need to change the filters depends on your usage. We recommend
changing them every three to six months. An activated charcoal filter cannot
be washed or recycled; it must be replaced with a new one.
This rangehood comes with a set of charcoal filters. To obtain replacement
filters, contact our after sales support line and arrange for purchase (see page
18 for details).
