12
Getting Started (Cont.)
Electrical connection
•
WARNING!
It must be possible to disconnect the appliance from the mains power
supply; the plug must therefore be easily accessible after installation.
•
Before plugging in your new fridge, we recommend you let it stand upright
for 12 hours.
This will allow the refrigerant gases to settle into the compressor and
reduce the possibility of a malfunction in the cooling system.
• The appliance must be earthed. The plug of the power supply cord is equipped
with a contact for this purpose. Do not under any circumstances cut or remove the
third (earth) prong from the power cord. If the plug does not fit your outlet, consult a
licensed electrician for advice to have the outlet changed.
• Plug the unit into a dedicated, properly installed and earthed wall outlet. Ensure that
your outlet voltage and circuit frequency correspond to the voltage stated on the
appliance rating label.
• Secure the power supply cord behind the unit. Do not leave it exposed or dangling
to prevent injury and accidental disconnection from the power supply.
• Adjust the temperature control as described on the next page.
•
When first starting up, and after a period out of use, allow the unit to cool down
on the maximum setting for at least 2 hours before placing food in the fridge.
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS
MODEL: STR-H115VBF PRODUCT CODE: 52814 03/2016
